Control modes: Air mode and baby skin mode.
Humidity display system.
Infant Incubator Feature:
1. Microprocessor-based servo controlled temperature system
2. Control modes: Air mode and baby skin mode
3. Humidity display system
4. Set temperature, air temperature, baby skin temperature, humidity, timer and heating power are displayed separately by LED
5. Integral timer to record therapy time
6. Self-testing function, various failure alarms by audible and visual
7. Alarm function:
Power failure, Over temperature, Temperature deviation, Fan failure, Temperature sensor failure
8. >37℃ temperature set function
9. Triple protection for over temperature with separate cut off device, more safety system
10. The inclination of the infant bed is adjustable
11. Single wall hood,4 operating windows and 2 iris ports, 5 infusion seals
12. Independent locking device for front door
13. RS232 connector, Oxygen inlet,1 tray
Infant Incubator Specification:
Power supply | AC110/220V, 60/50Hz |
Power input | 650VA |
Operating condition | Environment Temperature: 20℃ ~ 30℃ |
Air temperature control range | 25°C ~37°C, 37.1°C~ 38°C |
Skin temperature control range | 32°C ~37°C, 37.1°C~ 38°C |
Humidity Display Range | 0%-100> |
Skin temperature sensor accuracy | ±0.3°C |
Temperature fluctuation | ±0.5°C |
Uniformity of mattress temperature | ≤0.8°C |
Warm-up time(from25°C) | < 30min |
Internal noise level | <50dB(A) |
Infant bed tilt angle | ±10° |
Mattress size | 65cm(L)*37cm(W) |
Trough capacity | 1200mL |
Air filter | 0.5µm |