NICU Infant Incubator For Baby In Hospital TX-19001A
Microprocessor-based servo controlled temperature system.
Control modes: Air mode.
Humidity is adjustable in two levels.
Control modes: Air mode.
Humidity is adjustable in two levels.
0
Functions:
1. Microprocessor-based servo controlled temperature system
2. Control modes: Air mode
3. Humidity is adjustable in two levels
4. Set temperature, air temperature, heating power are displayed separately by LED
5. Self-testing function, various failure alarms by audible and visual
6. Alarm function:
Power failure, Over temperature, Temperature deviation, Fan failure, Temperature sensor failure
7. >37℃ temperature set function
8. Triple protection for over temperature with separate cut off device, more safety system
9. The inclination of the infant bed is adjustable
10. Single wall hood, 4 operating windows and 2 iris ports, 3 infusion seals
11. Locking device for front door
12. RS232 connector, 1 tray
Specification:
Power supply | AC110/220V, 60/50Hz |
Power input | 650VA |
Operating condition | Environment Temperature：20℃ ~ 30℃ |
Air temperature control range | 25°C ~37°C，37.1°C~ 38°C |
Temperature fluctuation | ±0.5°C |
Uniformity of mattress temperature | ≤0.8°C |
Warm-up time(from25°C) | < 30min |
Internal noise level | <50dB(A) |
Infant bed tilt angle | ±10° |
Mattress size | 65cm(L)*37cm(W) |
Trough capacity | 1200mL |
Air filter | 0.5µm |
