0
Ventilator Modes
A/C-V with sigh, A/C-P, SIMV-V, SIMV-P
Parameters
• Tidal Volume: 0~2000 ml
• Respiration Rate:
1~120 bpm (A/C mode)
1~40 bpm (SIMV mode)
• I: E Ratio: 1:10~4:1
• FiO2: 40%~100%
• Trigger Sensitivity:
Pressure trigger: -20~0 cmH2O
• Flow Trigger: 2~30 L/min
• PEEP: 0~30 cmH2O
• Pressure Value: Ppeak, PEEP
• Volume / Flow Value: Vt, MV
• Time Value: total
• Real-Time Curves: Pressure-Time, Flow-time
Alarm
Paw high | Paw low | MV high | Gas supply down |
No VT | FiO2 high | FiO2 low | Apnea |
Continuous pressure high | EX. power lost | O2 deficiency | Battery low |
Technical Data
1. Supply Gas: O2, 0.25~0.6 MPa
2. Power Supply: AC100~240 V, 50 Hz/60 Hz, ≤65 VA
3. Screen Size: 5〞LCD Screen
4. Maximum Security Pressure: ≤8 KPa
5. Compliance: ≤4 ml /100 Pa
6.Dimension (WxDxH): 168 mm x 156 mm x 300 mm
7. Battery Operating Time: Approx. 4.5H
8. Weight:
3.2 kg (Main unit)
8 kg (Main unit & Accessories)
• It helps optimize quality of care and patient comfort, improving patient outcomes• One device addresses diverse ventilation requirements, fully covering various situations
• Pressure Control and Volume control mode
• Invasive and Non-Invasive ventilation
• SPONT/PSV, CPAP modes
• Manual breath
• Inspiratory hold
• FiO2 40% to 100% continuously adjustable
• Waveform display: Pressure- time, Flow-time
• Alarm silence
• Pre-use test
• Waveform display and multi-parameter monitoring, Electronically controlled PEEP• Acoustic and visual alarm , Anti-crash design• Direct access to critical settings and patient data
• Operate with low flow oxygen supply
• Meets with EN1789 standard
• IPX4 waterproof level
Applications
Emergency – Transport – Intra-hospital transfer – Recovery
Multiple Ways of Power Supply
• Vehicle D/C power
• A/C power adaptor
• 4.5h long-lasting internal battery
• External backup battery(optional)
Comprehensive Accessories
• Suction unit
• 2.8L Oxygen cylinder kit
• Oxygen sensor
• Hanging plate assembly
• Bluetooth module
